Out of my comfort zone

I don't really like the colour orange. (I'm not keen on yellow or mustard colours either.) I guess I prefer cooler colours like greens and purples and blues, although I'm a big fan of red as well.

So I wasn't very impressed when some polymer clay beads went "wrong" on me and I ended up with orange.

I was playing with translucent clay and alcohol inks and made a lovely warm red colour. I added copper leaf and I was really happy until they came out of the oven... ORANGE!

A similar set I made at the same time with out-of-the-packet trans red and silver leaf looked exactly as I expected.

Ah well. Next experiment - red sand in translucent clay. Came out... you guessed it, orange.

So I thought, I'm being a bit prejudiced here. Plenty of people like orange, if I make some jewellery with the beads I don't like, someone else might love it. And I grabbed the offending beads, some copper wire and some other bits and pieces and almost forced myself to make a necklace.

And you know what? I actually like it. I'd like it a whole lot better if it was purple, but I like it.

And just for Carrie, here's how I did it.

I mixed alcohol inks into translucent clay. Note that the colour may be different when baked, so you could  do a test bake of a tiny piece before you commit to creating the beads. Adjust the colour if you want to. I also added some gold glitter to the clay and mixed well.

I rolled out a sheet of the coloured trans on the thickest setting, and placed a sheet of copper leaf on top.

Then I rolled this sheet into a jellyroll cane, with the leaf on the inside. It can be difficult to get the clay to stick to the leaf but persevere with it. It doesn't have to be neat but you don't want air bubbles.

I squared off the jellyroll cane and cut off a piece for the focal bead. I reduced the rest a little and cut it into sections to make the square beads. I softened the edges by gently rolling the bead in my palms, pierced and baked.

I textured the focal bead with rubber stamps, a different one on each side. Once it was pierced and baked I painted on brown acrylic paint, wiping it off the raised portions of the design and leaving it in the impressions.

I mushed up the waste ends of the cane to make some irregular oval beads, which I flattened out, pierced, and baked.

The beads were tumble sanded and buffed to a dull sheen.

Next came the wirework. For the focal bead I made a spiral in a piece of wire hammered it a little, threaded on a small round bead and made a wrapped loop at the top. I made a simple loop either side of the focal bead and dangled the round bead and spiral from it.

Each other link started with a hammered spiral with a straight "tail". I threaded the beads onto the tail and closed it with a loop. The loop attaches to the next wire just after the spiral - the pictures show this much more clearly than I can explain.

Some copper chain and handmade copper fastenings finished the necklace off.

So I learned a lesson. Working outside my comfort zone is good - I created something that's not my usual style, but is still a nice piece, and will mostly likely have an influence on the way my style develops in future. I feel it's helped me grow a little as an artist, and that wouldn't have happened if I'd just thrown out those orange beads.

I've been featured!

Well technically my pendants have, over at the lovely Cindy's blog.

I've had a lot of positive comments from people I've shown them to, and my local bead shop wants to sell them for me!

This is a great example of modification, which has lead to an original technique.

I've seen a lot of polymer clay work with metal leaf and inks - mostly mokume gane but also some funky crackled effects and I think it's cool. And fairly recently I spotted Cindy's take on this, and decided to have a go myself. As I explained on her blog, I couldn't get it right and didn't get the effect I wanted. So I tried a different way.

Here's how my technique goes, very briefly: (Next time I do this I'll be sure to take pictures of the process as I go, then I'll update this post.)

• Roll out black clay on the thickest setting.
• Add metal leaf on the top of the clay sheet. I usually use copper because I like the warm colours.
• Add drops of various colours of alcohol ink and leave to dry. This can take several minutes, I leave it at least 30 to make sure.
• Roll at next lowest setting. Rotate 90 degrees and roll at next setting after that. Some little bits of leaf will stick but that just adds to the effect so don't worry too much.
  
• Lay sheet on a ceramic tile and use cookie cutters to make pendants, disc beads, whatever shape you want. Peel away the waste clay, leaving the pendants/beads stuck down. Make the bead holes now - it's a bit tricky drilling them later.
  
• Bake for 30 mins and cool.
• Trim any rough edges, and add a layer of liquid polymer clay with a paintbrush.
• Bake again, 30 mins.
• Repeat with another layer of liquid clay and bake again.
• Finish with Future/Klear.

So yeah, a new technique that works for me.

Here's the same thing done in silver leaf, with some control over ink placement to create a rainbow effect.

I think modification is a useful creative process. Try a tutorial or a project from a magazine or book then think to yourself, how can I change this? What would make it better, easier, suit my style more? Then play around!

It's only by changing things that you learn how they actually work. And the more you learn, the more potential you have to create something truly unique.

In lieu of actual content...

I'm fascinated by Wordle. Here's a Wordle of this blog! Have a go yourself, it's great fun.

On originality

I've recently discovered Folksy (I may well be setting up shop there soon, but that's another post) and have spent some time recently looking through items which have been tagged with "polymer clay" and "polymer clay jewellery". For two reasons really - firstly to get an idea of what other UK clayers are producing and secondly for inspiration.

I don't think there's anything wrong with using other people's ideas. I seem to spend half of my life admiring pieces and wondering how I could make something similar myself. I've worked through a lot of online tutorials (particularly Cindy's videos) and made projects from books and I'm perfectly happy to make money from those pieces. I figure if something's in the public domain then it's okay. And you can't develop your own style and techniques until you've tried lots of different things.

But the key word here is similar. Maybe the first time I make a bead from a book I do it exactly the same. But I'll always create a different piece of finished jewellery to the one they show, and by the time I've made one "right" I'm ready to experiment and put my own spin on the project. Maybe I'd prefer it in warmer colours, or with glitter, or wrapped with wire, or as a bracelet rather than a necklace. And maybe I don't have Pearl-Ex powders so I'll just use metallic powders instead.

I'd like to think that any of my work which is inspired by tutorials or books is different enough, and requires enough of my own creativity and ideas, that I'm not stepping on anyone's toes by selling the work as my own.

Which is why I felt uncomfortable when I found a piece on Folksy that looked familiar. Now I'm not so au fait with the polymer clay world that I can immediately tell which artist created what, but this one was very distinctive. It's a distinctive piece by a distinctive artist and since I happen to have one of the artist's books which shows how to make that exact item I did a bit of a double-take.

Essentially it's a heart pin decorated with some simple cane slices. The one on Folksy was identical in all but three respects - the colours were different, the bullseye cane of the original was replaced with a solid dot cane, and the finish wasn't anywhere near as good.


I don't think that's sufficiently different enough, personally. I know that the Folksy artist is perfectly within their rights to make and sell such an item, but it somehow seems wrong to me because it's kind of like taking the credit for the design yourself just because you constructed the piece. I guess there's a fine line, but I think I'd prefer it if there was something like "In the style of Polymer Artist X" in the description.

But anyway, where's the artistry in copying? How creative is it to follow instructions? And isn't it more fun to do your own thing?

And in case you're wondering, the pieces in the picture are entirely from my own head.